Philips LED turun harga... Ayo beralih ke lampu LED...


The Shop

LoadingUpdating...

Infrared Motion Sensor - ST08

This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication.

FUNCTION:
Detection field: The wide detection range is made up of up and down, left and right (see the following diagram), the detection range could be adjusted according to your desire, but the moving orientation in detection field has great relation with the sensitivity.
Identify day and night automatically: The ambient light of ST08 could be adjusted according to your desire: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to testing way.
Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).
Time-delay is adjustable: It can be set according to your desire, the minimum is 10sec±3sec,the maximum is 7min±2min.

TEST:
Turn the time knob clockwise on the minimum (-), turn the LUX knob clockwise on the maximum (sun).
Switch on the power, the load doesn’t work and the indicator lamp doesn’t work. Warm-up 30sec later, the indicator lamp is turned on at the same time, under the conditions of no sense signal, the load should stop working within 5~10sec and the indicator lamp is turned off.
After the first is out, make it sense again after 5~10sec. The load should work. The load should stop working within 5~15sec when no any sense signal.
Turn LUX knob anti-clockwise on the minimum. If it is adjusted in the less than 3LUX, the inductor load should not work after load stop working. If you cover the detection window with the opaque objects (towel etc), the load work .under no induction signal condition, the load should stop working within 5~15sec.

SPECIFICATION:
Power Source: 220V/AC - 240V/AC
Detection Range: 180º
Power Frequency : 50Hz
Detection Distance: 12m max(<24°C)
Ambient Light:3-2000LUX (adjustable)
Working Temperature: -20~+40°C
Time-Delay:min:10sec±3sec max:7min±2min (adjustable)
Working Humidity: <93%RH
Power Consumption: 0.45W (work)
Rated Load:
220-240V/AC :
1200W (incandescent lamp)
300W (energy-saving lamp)
Detection Moving Speed: 0.6~1.5m/s
Installation Height:1.8m~2.5m


 
Berat : 0
Detail Produk:

Wiring & Instalasi






Harga: Call

<< Previous Product -    - Next Product >>